Barrett Model REC7 6.8 SPC 16″ Omega X Rail, 30 Round Mag
SKU:
816715011183
UPC:
BRAND:
Barrett Firearms
Manufacturer Number:
12256
Caliber:
6.8mm Remington
Unit of Measure:
Each
Classification:
Firearm
Omega X Rail. 17-4 Stainless piston system. Two position Nitride Gas Plug. Chrome lined gas block. Six position MOE stock. A2 Style flash hider. Two 30 round magazines. Three panel covers. Tactical soft case.
“Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with”
AT YOUR COMMAND.
The Barrett REC7 is a powerful and reliable rifle styled in the familiar AR configuration. It’s a no-nonsense rifle designed to answer the call for a low-maintenance, enhanced-reliability carbine. The REC7 exceeds expectations operators demand from today’s new breed of piston-operated rifles.
The REC7 rifle’s dependability stems from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, resulting in reduced maintenance requirements and increased endurance.
The patented, chrome-lined, fluted gas chamber design prevents excessive carbon buildup from impairing operation under adverse conditions. This in turn allows the one-piece, 17-4 stainless piston to transfer energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face. There is no separate gas key to shoot loose, and the nickel Teflon coating increases lubricity and simplifies cleaning. The Barrett Enhanced Piston Bolt is made from nickel Teflon coated 9310 steel. The bolt’s gas ring-free design is easy to clean and operates smoothly. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.
At the heart of the system is the nitrided, two-position (suppressed/unsuppressed) gas regulator that retains the piston. The piston can be accessed through the gas block without removing the handguard, so optical sights or laser devices do not need to be re-zeroed after routine maintenance. The top of the gas block also has an integral 1913 rail, extending the rail length for mounting accessories or sights.
The REC7 rifle’s forged 7075 aluminum upper and lower receivers are type 3 hardcoat anodized. The lower houses an ultradependable, mil-spec single stage trigger. The upper supports a free-floated, 16-inch hammer forged, chrome-lined barrel with M4 feed ramps machined into both the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.
The REC7, in 5.56 NATO and 6.8 SPC, can protect home, precinct or border with unsurpassed reliability. The REC7 is what you expect in a Barrett. Reliable. Powerful.
REC7 MODEL 12256
Under the familiar exterior lies an evolutionary design that few can match. REC7 rifles are made for those who value quality, dependability and performance . . . and for those who don’t have the option to fail.
The REC7’s operating system was designed to be soldier-proof, the highest accolade as to which a firearm design can aspire. A minimal number of parts and a clean-running piston system add up to a low-maintenance design with increased reliability. The piston operated system keeps heat and fouling out of the receiver, which means less time cleaning and more time putting bullets where they need to go. Cooler parts last longer, cooler guns run longer. REC7 was made to run harn transferring energy to the bolt carrier is the most robust in the industry. Its hardened one piece piston is superior to multi-component designs. The bolt carrier, machined from a monolithic block of 8620 steel features an integral piston strike face – no separate gas key to shoot loose and another industry first.
The REC7 gas block and gas regulator are chrome-lined for added durability, with a 1913 rail machined into the hardened billet gas block. Operators can configure the REC7 with iron sights or run slick for use with optics. The gas regulator position is firmly held in place with a substantial detent that cannot get knocked out of position with hard use.
The REC7’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The mil-spec lower receiver houses an ultra-dependable single stage trigger. The upper receiver supports a free-floated, 16-inch, chrome-lined barrel with M4 feed ramps. The A2 style flash hider reduces muzzle flash and acts as a standard inessories and support gear.
No matter what your mission, the REC7 can get the job done. Whether that mission means putting venison on the table, taking home a trophy at the local rifle match, serving a high-risk warrant, or jumping out of a C-130 at zero dark thirty – REC7 has you covered.
Barrett REC7 Features
SHIPS WITH TWO 30-ROUND MAGAZINES;BEVELED MAGAZINE WELL FOR RAPID CHANGES
ENHANCED TRIGGER GUARD ALLOWS ACCESS WITH GLOVES
Barrett REC7 Features
SHIPS WITH TWO 30-ROUND MAGAZINES;BEVELED MAGAZINE WELL FOR RAPID CHANGES
6-POSITION MOE STOCK
ENHANCED TRIGGER GUARD ALLOWS ACCESS WITH GLOVES
ONE PIECE PISTON AND OPERATING ROD;DANIEL DEFENSE FREE-FLOAT RAIL SYSTEM w/ THREE RAIL COVERS
TWO-POSITION NITRIDE GAS PLUG; CHROME-LINED MAGNETIC-PARTICLE TESTED BARREL
REINFORCED ENHANCED PISTON BOLT AND EXTRACTOR; ANTI-TILT BOLT CARRIER
Barrett REC7 Additional Features:
17-4 stainless piston systemChrome-lined gas blockA2 style flash hiderTactical soft case.
Barrett REC7 Model 12256 Specifications
MODEL: REC7 Model 12256
OVERALL LENGTH: 33.375″ (84.77 cm)
CALIBER: 6.8 SPC
BARREL LENGTH: 16″
OPERATION: Semi-Automatic, Piston-Operated
RIFLING TWIST: 1 in 10″
WEIGHT: 37.62 lbs (3.5 kg)
MAGAZINE CAPACITY: 30 Rounds